Purpose

This study sets out to explore the impact of organisational culture innovation on the adoption of information systems (IS) in Libya's oil and banking sectors.

Design/methodology/approach

Using a structured survey questionnaire based on Cameron and Quinn's Organisational Culture Assessments Instrument (OCAI), 400 questionnaires were administered to middle and top management employees in more than 15 government and public organisations in Libya's oil and banking sectors.

Findings

The findings showed that there is a relationship between organisational culture innovations and the adoption of IS. The findings also showed that there are no differences in the organisational culture type between the two sectors covered in this study.

Originality/value

The findings imply that organisational culture innovations are influenced by other factors, which are worthy of investigation. The future implications of this research are also discussed.

Abstract

This paper is devoted to study the effect of corrugation geometry on the crushing behavior, energy absorption, failure mechanism, and failure mode of woven roving glass fibre/epoxy laminated composite tubes. A comprehensive experimental program has been carried out on two geometrically different types of composite tubes subjected to axial compressive loading conditions. A cylindrical composite tube has been fabricated and tested in order to provide a means of comparison with corrugated composite tube. Both are tested under the same condition to establish the effect of corrugation geometry. The results showed that the initial failure was dominated by interfacial failure, while a folded zone grows progressively down in a form of mushrooming failure. The results also showed that radial corrugated composite tube (RCCT) exhibited good energy absorption capability than circular composite tube (CCT).

Abstract: The purpose of this work is to investigate the effect of the dimensions of composite tubes on their specific energy absorption capacity. Experimental investigations were carried out on three geometrical different cylindrical composite tubes subjected to compressive loading. More over a radial corrugated composite tube was subjected to the same load conditions in order to examine the varying of shape influence on the energy absorption of composite materials. Initial results indicate that for cylindrical tubes, diameter to thickness ratio has a significant effect on the energy absorption. Reduction in tube d/t ratio results in an increase in energy absorption. More over results show also radial corrugated composite tubes exhibit higher total energy absorption than cylindrical composite tubes. 

Experiments were performed to investigate the diffusion ignition process that occurs when hot inert gas (argon or nitrogen) is injected into the stoichiometric hydrogen-oxygen mixture at the test section. Detonation wave initiated by spark plug in the driver section in stoichiometric acetylene-oxygen mixture at P = 0.5 MPa and room temperature, propagates as incident shock wave in the driven section through inert gas after bursting the diaphragm separating the sections. At the end wall of driver section the inert gas is heated behind the reflected shock wave and then injected into the test section with the stoichiometric hydrogen-oxygen mixture through the hole 8 mm in diameter. An increase of the initial pressure of the combustible mixture in the test section from 0.2 to 0.6 MPa resulted in decrease of the minimum temperature of injected gas causing ignition from 1650 K to 850 K. At the same time the induction time for ignition process has increased from 190 to 320 s when hot argon was injected. For the injection of hot nitrogen an increase of the initial pressure of the combustible mixture from 0.2 to 0.4 MPa resulted in decrease of the minimum temperature of injected inert gas giving ignition from 1150 K to 850 K, and in increase of the induction time from 170 to 240 s. The results of experiments indicate that ignition occurs when the static enthalpy of injected mass of inert gas exceeds some critical value. The mechanism of ignition process was also studied by schlieren photography.

Abstract

           This paper presents the effect of corrugation geometry on the crushing behavior, energy absorption, failure mechanism, and failure mode of woven roving glass fibre/ epoxy laminated composite tube. Experimental investigations were carried out on three geometrical different types of composite tubes subjected to compressive loading. On the addition to a radial corrugated composite tube, cylindrical composite tube, and corrugated surrounded by cylindrical tube were fabricated and tested under the same condition in order to know the effect of corrugation geometry. 

This research presents the effect of radial corrugation geometry on the crushing behavior, energy absorption, failure mechanism, and failure mode of woven roving glass fibre/ epoxy laminated composite tube. Experimental investigations were carried out on three geometrical different types of composite tubes subjected to compressive loading. On the addition to a radial corrugated composite tube, cylindrical composite tube, and corrugated surrounded by cylindrical tube were fabricated and tested under the same condition in order to know the effect of corrugation geometry. 

Abstract: This paper is devoted to study the effect of corrugation geometry on the crushing behavior, energy absorption, failure mechanism, and failure mode of woven roving glass fibre/epoxy laminated composite tubes. A comprehensive experimental program has been carried out on three geometrically different types of composite tubes subjected to axial compressive loading conditions. A novel method has been developed to fabricate the radial laminated corrugated composite tubes, cylindrical composite tubes, and corrugated surrounded by cylindrical tubes. All are tested under the same condition to establish the effect of corrugation geometry.

This paper investigates the impact of the hand-hold positions on both antenna performance and the specific absorption rate (SAR) induced in the user’s head. A cellular handset with external antenna operating at GSM-900 frequency is modeled and simulated using a finite difference time-domain (FDTD)-based platform SEMCAD-X. A specific anthropomorphic mannequin (SAM) is adopted to simulate the user’s head, whereas a semirealistic CAD-model of three-tissues is designed to simulate the user’s hand. The results show that in case of the handset in hand close to head at different positions; the antenna total efficiency gets reduced to (14.5% - 5.9%) at cheek-position and to (27.5% to 11.8%) at tilt-position. The peak averaged SAR1g values in head close to handset without hand, are 4.67 W/Kg and 2.66 W/Kg at cheek and tilt-position, respectively. Due to the presence of hand, the SAR1g in head gets reduced to (3.67-3.31 W/Kg) at cheek-position and to (1.84-1.64 W/Kg) at tilt-position, depending on the hand-hold position.