The heterogeneous design of multi-core processors, 

such as the Cell processor, introduced new challenges in porting 

high-level languages. Our project is developing tools that hide the 

underlying details of the Cell processor and eases parallel 

programming. We present a Virtual SIMD machine (VSM) 

paradigm that can be used to parallelize array expression 

automatically. The novelty is the use of a virtual SIMD machine 

model to completely hide the underlying details required for 

programming the Cell processor. The VSM paradigm can also be 

used to develop an automatic parallelizing compiler for the Cell 

Broadband Engine (Cell BE). In this paper we give an overview 

of the VSM interface and present preliminary results that show 

the performance of our VSM and its behavior on multiple 

accelerator cores using basic arrays operations

A numerical simulation of a two-stage reciprocating compressor has replicated the operations of the compressor under various conditions for the development of diagnostic features for predictive condition monitoring. The simulation involves the development of a mathematical model of five different physical processes: speed–torque characteristics of an induction motor, cylinder pressure variation, crankshaft rotational motion, flow characteristics through valves and vibration of the valve plates. Modelling both valve leakage and valve spring deterioration has also been achieved. The simulation was implemented in a MATLAB environment for an efficient numerical solution and ease of result presentation. For normal operating conditions, the simulated results are in good agreement with the test results for cylinder pressure waveforms and crankshaft instantaneous angular speed (IAS). It has been found that both the IAS 

 This study is a comparison between English and Arabic vowels. First a description and classification of vowels in the two languages is given. Then the two sets of vowels are contrasted to find which vowels are similar and which are not. Finally, the set of similar sounds are analysed acoustically to find out to what extent they are similar. This is done by recording two sets of words containing these vowels and measuring their formants and duration. The findings show that although these sounds are similar in some aspects, Arab learners of English do not replace English vowels with their Arabic counterparts but, instead they try to reach the target sounds even though they are not completely successful in achieving their goal. 

In the introduction of this paper the aims, the subject and its importance are briefly stated. However, the paper consists of two main parts. The first part deals with the segmental phonology of Tripolitanian Arabic and this includes classification of both vowels and consonants and relevant features such allophonic variation, length, geminating and clusters. The second part, on the other hand, deals with the suprasegmental level of the dialect and in which its syllable structure and stress pattern are discussed. In the conclusion, the findings of the research are summarised and some recommendations for further research are given. 

Hydrodesulfurization (HDS) and Hydrodearomatization (HDA) of a real Straight Run Gas Oil (SRGO) were investigated over CoMo–S sulfide catalyst in a high–pressure fixed–bed integral reactor. The effect of the key process parameters on the quality of product was studied by varying the temperature (200–370°C), pressure (20 to 50 bar) and space velocity (1 to 4.7h-1). Experimental results revealed that HDS,% activity improved up to 81% when the temperature was increased up to 370°C but reduced to 60% with increase of space velocity up to 4.7 h-1. It has been also found that the rate of HDA, % activity enhanced up to 40.6% by increasing pressure up to 50 bar. The Cetane index underwent an increase of 1–3 degrees and gravity increased by 1–1.7° API. The implication of these results on refining industry is that mild hydrotreating of diesel fuels using the single–stage technology will not enable local refineries to produce diesel fuel meeting the current specifications (<15 ppmwt) except with severe/deep once–through desulfurization or two–stage once–through desulfurization with or without splitting the first reactor effluent. Key words: Diesel fuel; hydrodesulfurization; hydrodearomatization; CO–MO–S/ Al2O3 catalyst

 Abstract: The paper presents an adaptive intelligent control method to overcome effects of some indeterminate and undealt factors that a DC .drive is suffered. In the speed loop, we use a three-layer neural networks through a backpropagation (BP) algorithm out of line learning to realize the fuzzy-control tactics. We use unit neuron through Hebb algorithm on-line dynamic learning to realize adaptive mechanism. The simulation is based on a MATLAB6.0 neural networks toolbox with simulink. The results of the simulation show that adaptive intelligent control method enables the system to have good dynamic and stability performance. The proposed method develops the use of simulink in the field of electrical drive of adaptive intelligent control.

Tiagabine (TGB) is an antiepileptic agent enhancing the activity of GABA at neuronal and glial region. It has recently been shown that enhancement of TGB chemical stability was improved by complexation with 2-hydroxypropyl-beta-cyclodextrin (2-HPβCD). The aim of this project is to explain the improvement of the chemical stability of complexed TGB by studying the inclusion properties and factors affecting the complexation selectivity between 2-HPβCD and TGB. Analysis of the interaction between 2-HPβCD and TGB and the effect of 2-HPβCD on TGB solubility was performed by phase solubility method described by Higuchi and Connors; the complexation was followed by characterization using DSC, FTIR and NMR spectroscopy. In aqueous media, the analysis of NMR proton shift change continuous variation method (Job’s plot) and the NMR diffusion-ordered spectroscopy (DOSY) measurements clearly show that TGB form 1:1 inclusion complex with 2-HPβCD with an association constant (K a) of 3396 M⁻¹. More detailed information about the inclusion mode and the geometry of the complex was obtained by the analysis of 2D NMR NOESY experiment and molecular modelling calculations. The inclusion process indicates that A-ring, C10–C11 double bond and the half of the B-ring of TGB molecule were located inside the cavity while the nipecotic acid part of TGB (Ring C) was exposed towards the outside of the 2-HPβCD cavity. These results suggest that the inclusion of the C10–C11 double bond in the 2-HPβCD cavity may possibly the reason of improvement of TGB chemical stability.

With the increase inherent technologies and parties involved during the design process of green buildings, Green Design Process (GDP) becomes more complex motion. The selection of a competent Design Team (DT) is essential to overcome the complexity for high performance green design. Certain attributes of the design team are required. The overall objective of this research is to provide the green design team with key attributes that design team should have to be used to improve their design performance of buildings. Furthermore, Internal and external factors influencing these attributes, specifically, Governance system, client quality and Project Nature to be investigated. Design team attributes variables were identified based on literature within the domain of green design team responsibilities. By conducting a questionnaire survey this study identified the common design team attributes and their relative importance to design green buildings. A sample of 277 respondents has been covered under the study, including architects and engineers practicing design and consultancy in Malaysia. Analysis data includes descriptive and quantitative analysis by using SSPS software version 16 was carried out. A correlation and regression models was established to explore the relationship between identified factors. The results showed that the design team needs to comply with certain knowledge and skills that necessary to overcome complexity of the green design process. On the other hand, Clients should consider green design need additional time. Moreover, Governance system and client quality have major influence on design team attributes. An effective approach such as training courses to design team to increase their competency in order to improve green design performance.